Dickinson Woodworking's Herringbone pattern boards are made using ¾” strips of wood in a multiple stage laminating process. The short pieces that make up the “v” pattern help with the stability of the board and prevent warping in addition to forming the striking pattern that gives them their name. A beautiful addition to any kitchen!
Each board has a different pattern of woods and will be unique. The large herringbone cutting board measures 10" x 14" x .75"
Dickinson Kitchenware cutting boards are sealed using their special curing kitchenware oil for low maintenance.
Care instructions for keeping your wood purchase in good shape:
1. put your woodenware in the dishwasher
2. Hand wash with warm soapy water. Do not let sit in water!
3. Remove excess water with a clean dry towel
4. Allow to completely air dry on all sides evenly (putting in a dish drainer works well)
5. put your woodenware away wet.
Please follow these directions and your woodenware should last many years!
Apply a liberal coat of Dickinson Kitchenware Oil or a thin layer of Dickinson's End Grain Balm if/when dry spots arise. This could be a week or several months depending on how much it is used and washed with soap. Other food safe oils, such as mineral, walnut, and coconut oils, may also be used. These are not curing oils and will need to be reapplied more often to maintain your woodenware.
We recommend you do not use vegetable oils as they can go rancid over time.
Wipe with vinegar or lemon juice. Let stand one minute, rinse. Apply oil after disinfection.